When to call for Professional AC Repair

That would be the first question popping up in your mind when you suspect that there is something wrong with your AC. Air conditioning repair is not some easy stuff to handle, so you will need the assistance of expert air conditioning repair mckinney tx to help you fix it.

Some typical Air Conditioning problems to look for when your AC seems to malfunction, you are likely to first come across one or more of the below-given conditions inside your residence.

Decreased airflow
Uneven cooling in overall home
Warm air flowing from vents
High humidity levels
Bad odors
Unusual sounds

These symptoms are caused by various common problems that affect your AC units, which include:

● Fan or condenser problems:

In case your fan breaks or the condenser stops, heat gets build up in the AC unit, which further leads to a host of problems if it is not repaired immediately.

● Broken parts:

Any noise that you might not be familiar with, can indicate a problem with your unit. Probabilities are that a belt could have been broken or an AC component might have broken off and begin to rattle around inside the AC unit. Call for AC service at earliest before more damage is caused.

● Frozen coils:

Moisture builds up on AC coils and then freeze into a block of ice when the airflow is blocked or stopped. This Icing can further cause reduced cooling capacity and lead to permanent damage to the compressor if ignored for a longer period. Changing air filters at regular intervals will reduce the probability of freezing coils.

● Short-cycling:

This term indicates the AC unit which starts and stops too frequently. Short cycling is generally due to a broken thermostat, and it ultimately puts pressure and stress on the condenser.

● Water leaks:

There is probably a clog in your drain line if you find pools of water around your AC unit. Water leaks can also further lead to mold growth.

● Refrigerant leaks:

Refrigerant is the chemical coolant due to which air conditioning is possible. The level should never go too low. In case if that happens, chances are that there is a leak or might be the system was inadequately charged at installation. Only a trained professional technician will be able to diagnose and repair a refrigerant problem.