3 Expert Tips to Unclog Your Toilet
In any Australian household, having a clogged toilet is not only inconvenient, but it can also pose certain health hazards, particularly if not treated immediately. For this reason, make sure that you address a clogged toilet problem promptly. Fortunately, there are already several ways on how you will be able to resolve this problem and some of these are listed below.
Use a Plunger
One of the most viable ways to unclog a toilet is to use a plunger. However, you need to initially test the drainage of your toilet by removing the tank lid and lifting the flapper valve slightly. This will let a couple of water cups into the bowl and from there, observe whether the water goes down. If not, then it’s time to bring out your plunger.
As much as possible, go for a plunger with an extension flange because this is designed to fit your toilet better. You should also make your first plunge a gentle one but as soon as you force out the air, you can already plunge vigorously while maintaining the seal. Just be patient and keep enough water in the bowl to keep the plunger covered.
Hopefully, a plunger will be able to clear the clog in your toilet. If not, there are still several other ways that you can consider. Nevertheless, the experts in toilet repair Sydney locals rely on suggest that the best way to address this issue is still by calling in the experts who will be able to help. In doing so, you are guaranteed that your toilet problems will be resolved in no time the first time.
Pour Dish Soap or Hot Water
In case a plunger doesn’t work, you can also try pouring dish soap into your toilet. The slippery nature of the soap will help lubricate your pipe, allowing the debris that is stuck into it to slide down effortlessly. All you need is about half a cup but if you don’t have liquid dish soap, you can also try chopping a bar of hand soap into small pieces and drop them into your toilet.
If pouring dish soap is still ineffective to clear the clog in your toilet, you can supplement further with the use of hot water. Just remember to use hot, but not boiling water as the latter can cause your porcelain toilet to crack. When you pour the water, maintain a waist level too as the force from this height can possibly dislodge whatever is causing the clog in your toilet. Another alternative is to pour a baking soda mixture in case the dish soap or the hot water is still ineffective.
Try a Wire Hanger
Apart from the use of a plunger or dish soap and water, you can also try to use a wire hanger to unclog your toilet. In this case, you need to use the wire hanger as a drain snake to manually move the item causing a clog. You just need to push one end of the hanger into the clogged area as soon as you have unravelled it into a straight wire. Prod the debris until it is freed from being stuck.
There are several ways on how you will be able to unclog your toilet such as by using a plunger or pouring dish soap and hot water into it. There is also the option for you to use a wire hanger as a drain snake or leverage a baking soda mixture. If none of these methods still don’t seem to work, it is time for you to call in the help of seasoned plumbers in Sydney who will be able to resolve your toilet issues in no time.
